Miele KM 7464 FL - Page 36

Commissioning
36
Connecting via WPS
- A home WiFi network is available.
- The signal of your WiFi network is
sufficiently strong in the place
where your hob is installed.
- There is no direct WiFi connection
between the hob and a Miele
cooker hood (Con@ctivity3.0).
- You must have a WPS (WiFi
protected setup) compatible
router.
 Touch the 0 and 6sensor controls at
the same time for 6seconds.
The seconds can be seen counting
down in the timer display. After the time
has elapsed, a progress light appears in
the timer display during the connection
attempt (for max. 120seconds).
The WPS login is active during these
120seconds.
 Activate the WPS function on your
WiFi router.
If the connection was successful, the
code: appears in the timer display.
If the connection could not be
established, the timer display will show
the code:. You have probably not
activated WPS on your router quickly
enough. Repeat the steps above.
 Install the Miele app.
 Follow the user navigation in the app.
You can use all Miele@home functions.
Tip: If your WiFi router does not support
WPS, please connect via the Miele app.