Commissioning
37
Cancelling the process
Touch any sensor control.
Resetting settings
Reset the settings if you are disposing
of your hob, selling it or putting a used
hob into operation. This is the only way
to ensure that all personal data has
been removed and the previous owner
will no longer be able to access the
hob.
Resetting is not required when
replacing the router.
Switch the hob on.
Touch the 0 and 9sensor controls at
the same time for 6seconds.
The seconds can be seen counting
down in the timer display.
After this time has elapsed, the
code: is displayed in the timer
display for 10seconds.
To Next Page
