Miele KMDA 7774 - Error Codes and Liquid Ingress

Problem solving guide
55
Problem Possible cause and remedy
1 and a number, e.g. 1-0
flash alternately with a 3
digit number in the
timer display.
Cooking zone fault
 Interrupt the power supply to the cooktop for
approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.
 alternating with a
number flashes in the
timer display.

The overheating protection mechanism has been
activated.
 See “Overheating protection”.
,  or 
The fan is blocked or defective.
 Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
 If this fault message continues to appear in the
display, contact Miele.
 and other numbers
There is a fault in the electronic module.
 Interrupt the power supply to the cooktop for
approx. 1minute.
 If the problem persists after power is restored,
please contact Miele.
Liquid has entered the
extractor.
Due to boiling over or spillage, liquid has made its
way through the extraction grille into the extractor.
The base of the grease filter can hold approx. 250ml
of liquid. The drip tray underneath the housing can
hold a further 250ml of liquid.
 Switch the extractor off.
 Clean the grease filter, the drip tray and the inside
of the housing (see “Cleaning and care”).
Extraction performance
has decreased.
Extraction noise has
increased.
Objects (e.g. a cloth) have been drawn into the
extractor.
 Switch the extractor off.
 Remove the grease filter (see “Cleaning and care”).
 Remove any objects from the grease filter.