Miele PG 8060 - Page 101

Problem solving guide
101
Problem Cause and remedy
Fault578 The peak load cut-out has lasted longer than 3hours.
 Have your electrical system and your energy
management system tested by a suitably qualified
person.
Fault XXX
(XXX stands for a number)
There may be a technical fault.
After 10 seconds:
 Switch the dishwasher back on.
 Select the programme you want.
 Press the Start/Stopbutton.
If the fault message appears again, there is a technical
fault.
 Call the Miele Service Department.