Miele PG 8060 - Switch off after

Further settings
90
Switch off after
When not in use, the commercial dishwasher can be switched off to
save energy or be placed in standby mode by selecting an option
from the Settings , Time of day, Display menu.
The clock display will be visible in standby mode.
 Select the Further settings menu.
 Select Switch off after and open the corresponding menu by
pressing the OKbutton.
The following options are available:
Switch off after
Yes
No
(
- Yes
The “Switch off after” option is active and you can specify a time
period after which the machine switches off.
- No
The “Switch off after” option is not active.
Setting the
“Switch-off time”
 Select the Yes option and confirm your choice with the OKbutton.
In the factory default setting, the switch off after time is set to
60minutes. A time of between 5 and 60minutes can be set in 5-
minute increments.
Switch off after
60 Min
(5 - 60 Min)
 Use the arrow buttons (higher)  (lower) to set the switch-off
time, and confirm your entry with the OKbutton.