Miele PG 8060 - Additional Functions; Resetting

Further settings
79
Additional functions
With these functions, it is possible to adjust individual parameters to
adapt programme sequences to particular types of soiling and
optimise cleaning results.
 Select the Further settings menu.
 Select Additional functions and open the corresponding menu by
pressing the OKbutton.
In the following menu, you can choose between:
- Reset
Reset all of the parameters changed under the “Additional
functions” menu to their factory defaults.
- Increased water level
Increase the amount of water used in all wash programmes.
- Interim rinse
Include an interim rinse in all programmes that support this feature
(see “Programme chart”).
- Dispensing system
Vent the dispensing systems and change the name of the
dispensing modules.
- Temperature / time
Change the temperature and holding time for the main wash and
final rinse stages of a wash programme.
Resetting
 Select the Reset option and confirm your choice with the
OKbutton.
Reset
Yes
No
(
 Select the Yes option and confirm your choice with the OKbutton.
All parameters that have been changed under “Additional
functions” will be reset to the factory default setting.