Operation
54
Interrupting a programme
A programme which is already running should only be interrupted if
strictly necessary, e.g. if the wash load is moving about significantly.
Caution. The wash load and the interior of the dishwasher may
be hot.
Danger of scalding and burning.
Press the button.
If the temperature in the wash cabinet is more than 70 °C, the
warning Wash cabinet too hot will appear in the display.
Confirm the message shown with the OK button.
The following will appear in the display:
Select Yes and confirm your choice with theOK button.
The programme will only be cancelled when Yes is confirmed.
If there is no further input 20 seconds after the button has been
pressed, the display will revert to the programme sequence.
The door will open and the following message will appear in the
display:
K
Programme interrupted:
Door opened
Rearrange the items so that they are stable.
Close the door.
The programme will continue from the point at which it was
interrupted.
The display will automatically revert to the programme sequence.
To Next Page
Loading...
Need help?
General
