Miele PG 8060 - Increased Water Level; Interim Rinse

Further settings
80
Increased water
level
 Select the Increased water level option and confirm your choice with
the OKbutton.
The amount of water is shown in litres and can be increased in
0.5litre increments up to 1.5litres.
Increased water level
0,0 l
(0,0 - 1,5 l)
 Use the arrow buttons  (higher) and  (lower) to select the
amount of water you want and confirm your choice with the
OKbutton.
Interim rinse
 Select the Interim rinse option and confirm your choice with the
OKbutton.
The following options are available:
Interim rinse
Yes
No
(
- Yes
Interim rinse activated.
- No
Interim rinse not activated.
 Select the option you want and confirm your choice with the OK
button.