EasyManua.ls Logo

Miele PG 8060 - At the End of the Programme; Switching off; Unloading the Dishwasher

Miele PG 8060
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
53
At the end of the programme
After a programme which has ended normally the Start/Stop button's
LED will go out and the button's LED will flash. The message
Programme finished will appear in the bottom line of the display.
Universal
Temperature
Programme finished
55 °C
In addition to this a buzzer will also sound for approx. 3 seconds
(factory default). To alter the buzzer tones see “Settings , Buzzer
tones”.
If drying assistance has been activated (see “Settings , Drying”), the
door will automatically open a few centimetres.
If the switch-off function is activated, the dishwasher switches itself
off after a short time.
Press the button to switch on.
Switching off
Press the button until the LED in the button goes out.
Unloading the dishwasher
Dishes tend to break and chip more easily when they are hot. Allow
the dishes to cool until they are comfortable enough to handle before
unloading them.
If you open the door fully after switching off, the dishes will cool much
faster.
First unload the lower basket, then the upper basket. This will prevent
water drops from the upper basket falling onto the dishes in the lower
basket.

Table of Contents

Related product manuals