Miele PG 8060 - PIN Code; Approval; Changing the PIN Code

Further settings
74
PIN code
A PIN code can be used to prevent unauthorised access to various
functions and system settings on the commercial dishwasher.
 Select the Further settings menu.
 Select Code and press OK to open the relevant menu.
- Release
Restrict access to the Further settings menu to users with
administrative rights only, or allow access to all users.
- Change code
Set a new PIN code.
Approval
 Select the Release option and confirm your choice with the
OKbutton.
 Select Further settings and confirm your choice with the OKbutton.
The following settings are available:
Further settings
Yes
Block
(
- Yes
The menu is available to all users.
- Block
Access to the menu is only possible with a PIN code.
A tick indicates the current setting.
 Select the appropriate option and confirm your selection with the
OKbutton.
Changing the PIN
code
 Select the Change code option and confirm your choice with the
OKbutton.
 First enter the current PIN code (see “Entering the PIN code”).
 Then enter a new PIN code.
 Save the new PIN code by confirming the last digit.