Miele PG 8060 - Page 119

Plumbing
*INSTALLATION*
119
- The DN10 inlet hose is approx. 1.7m long, terminating in a 3/4
inch female thread. A 1.5m long flexible metal extension hose
tested to 14,000kPa (140bar) is available as an optional accessory
if required. On no account may the inlet filter in the female thread
be removed.
- Install the large-surface filter (included in the accessory pack)
between the valve and the inlet hose.
(See “Problem solving guide, Cleaning filters in water inlet” for
illustration.)
 Do NOT shorten or otherwise damage the inlet hoses (see
diagram).
See installation diagram supplied.