Miele PG 8060 - Page 22

Commissioning
22
Setting
the time
The display will change to the screen for setting the time of day.
Time of day
12 : 00
 Use the arrow buttons (higher) and  (lower) to set the hours and
minutes, and confirm each entry with the OKbutton.
If you have selected 12h for the clock format, “am” (in the morning)
or “pm” (in the afternoon) will appear beside the time.
Setting the water
hardness
The display will change to the screen for setting the water hardness.
The commercial dishwasher must be programmed for the water
hardness level in your area.
 Your local water authority will be able to advise you of the water
hardness level in your area.
 Where the water hardness fluctuates, e.g. between 1.4 and
3.1mmol/l (8–17°dH – German scale), always programme the
dishwasher to the higher value (3.1mmol/l or 17°dH in this
example).
In the event of a fault, it will help the service technician if you know
the hardness of your local water supply.
 Therefore, please enter the water hardness:
____________________°dH
The dishwasher is programmed at the factory for a water hardness
level of 3.4mmol/l (19°dH – German scale).
Water hardness
19
(0 - 70 °dH)
°dH
 Use the arrow buttons (higher) and  (lower) to set the water
hardness level required and confirm your entry by pressing the
OKbutton.
See “Filling the container for dishwasher salt” for more information
about setting the water hardness level.