Miele PG 8060 - Page 83

Further settings
83
Changing a DOS
name
 Select Change name and confirm your choice with theOK button.
Change name
DOS1
<
_ _ _ _ _ _ _ _ _ _ _
P
OK
#
a
ä b c
.
The current name is shown on the second line of the display. This can
be changed using the options shown in the bottom line.
DOS is a set part of the name and cannot be changed.
The top line shows which option has been selected.
 Navigate using the arrow buttons to shift the cursor to the option
required:  (moves to the right) and  (moves to the left).
 Confirm each option individually with the OKbutton.
The following options are available:
- Letters from A - Z;
each new word will start with a capital letter.
- Numbers from 0 - 9
- Space
- Use the  symbol to delete the last position in the name displayed.
- Select OK to save the name.
- If you do not want to save the name you have given press the 
symbol.