Cleaning and care
96
Cleaning the flat
and micro-fine
filters
Remove the coarse filter.
Grasp the micro-fine filter by the upper rim and turn it in the
direction of the arrow to release it.
Then lift it out.
Remove the flat filter.
Rinse the filters thoroughly under running water. If necessary use a
soft washing-up brush to remove soiling.
Replace the filter combination in the reverse order, turning the micro-
fine filter to the left to re-engage it.
The flat filter must lie flat in the bottom of the wash cabinet.
The spray arms will get blocked if the filters are not replaced
correctly.
To Next Page
Loading...
