Display Operation
Depending on the operating level, the following choices are
available in the display:
–
a program / the program overview
–
the Programming menu
–
the Settings menu J
In the Settings J menu, you can adjust the Profitronic
control system of the washer-disinfector to suit various
requirements. For additional information, please see the
Programming Manual.
Example of a selection list
Programme overview B
REACTIVATION
DES-VAR-TD
DES-VAR-TD-AN
#
Use the - e buttons to move through the menu items.
The marking in the display can be moved using the -e
buttons.
Use the OK button to confirm messages or settings and
change to the next menu or another menu level.
To select a menu item, mark it using the -e selection
buttons, then confirm with the OK button.
A maximum of three menu items or selections can be shown
in the display. A scroll bar at the right of the display shows
that additional menu items or selections are available. Use
the -e selection buttons to display them.
A dashed line marks the end of the list. The last entry on the
list is above the line, the first entry is below it.
Guide to the washer-disinfector
16
To Next Page
Loading...
