Adding liquid detergents and
neutralizers
^ Open the dispensing drawer that
houses the chemical canisters.
^
Take the container out of the
washer-disinfector and place it on the
open door of the washer-disinfector.
^ Open the container and fill it with the
appropriate processing chemicals,
always complying with the color
coding.
^ Insert the suction tube into the
container opening and screw it into
place. Make sure to observe the
color coding.
Once the containers have been filled,
the message clears from the display.
^
Place the container in the dispensing
drawer und close the drawer.
Adding liquid detergents and neutralizers
51
To Next Page
Loading...
