Cleaning the surface and micro-fine
filters
^
Remove the coarse filter.
^
Remove the fine filter from between
the coarse and the micro-fine filters.
^ To unscrew the micro-fine filter, take
hold of the two lugs and turn twice in
an anti-clockwise direction.
^
Then remove the micro-fine filter
together with the flat filter.
^ Clean the filters.
^ Replace the filters by carrying out the
above steps in the reverse order.
Ensure that the filters sit flat in the
base of the wash cabinet.
Maintenance of the washer-disinfector
60
To Next Page
Loading...
