Current faults
The Current faults option is displayed in Operating level D if
there has been at least one fault at that point in time. In
operating level D the current fault messages can be read
under this menu item.
^
Select the menu item and confirm using OK.
The current fault messages are displayed.
^
Use OK to scroll through the fault messages.
^
To leave the context menu, use +C.
Reactivation
This menu option is shown on operating level C only as long
as no program is running.
All other steps in connection with the water softener are
described in the chapter "Water softener".
Context menu
24
To Next Page
Loading...
