Temperature sensor
The washer-disinfector is equipped with
a temperature sensor that switches off
the heater when it threatens to
overheat. Overheating can occur when,
e. g. large items cover the heating
elements, or when the filters in the wash
cabinet are blocked.
If the fault message "Inspect wash
cabinet heater" is displayed in the
display, proceed as follows:
^
Remove the underlying cause.
^
Open the service flap.
^ Press the reset button for the ther-
mostat on the right side of the plinth
(base).
If the thermostat is triggered again,
please contact Miele Service without
delay.
Troubleshooting
66
To Next Page
Loading...
