,
ALWAYS refer to the installation
diagram included with the machine!
,
In order to reduce the risk of
steam damage, the area around the
washer-disinfector should be limited
to furniture and fittings that are
designed for use in commercial
wash environments.
The washer-disinfector must be in a
stable and level horizontal position.
Use the front screw feet to compensate
or adjust for unevenness in the floor.
The screw feet can be screwed out up
to 10 mm.
If the screw feet are tightened all the
way in, you can use casters to move
the washer-disinfector forward and
backward.
How to install the machine
69
To Next Page
Loading...
