EasyManua.ls Logo

Miele PG 8536 - Technical Data

Miele PG 8536
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Height 117.5 cm
Width 90 cm
Depth
Depth with door open
70 cm
126.5 cm
Weight (net) 180 kg
Voltage, rated load, fuse see data plate
Power cord approx. 1.8 m
Water temperature: Cold water
Hot water and DI water connection
max. 20 °C
max. 70 °C
static water pressure max. 1000 kPa overpressure
Min. flow pressure:
Hot and cold water
DI water connection
150 kPa overpressure
60 kPa overpressure
recommended flow pressure:
Hot and cold water
DI water connection
0 250 kPa overpressure
0 150 kPa overpressure
pressureless DI water connection optional, 8.5 - 50 kPa
Drain height min. 0.6 m, max. 1 m
Steam condenser approx.2-4l/min
Room temperature 5 °C to 40 °C
Relative humidity maximum
linear decreasing to
80 % for temperatures up to 31 °C
50 % for temperatures up to 40 °C
Altitude above sea level up to 1500 m
#
Contamination level P2 (as per IEC/EN 61010-1)
Ingress protection (as per IEC 60529) IP20 (ingress of dust)
Noise level in dB (A),
peak LpA for cleaning and drying cycles
<70
Certification marks CSA, Health Canada reg.Medical
device Class II, VDE, radio
interference protection
! mark MPG Guidelines - 93/42/EEC, Class IIb
Address of manufacturer Miele & Cie. KG, Carl-Miele-Str. 29,
33332 Gütersloh, Germany
#
If the machine is installed above 1500 m, the washwater will boil at a lower tem
-
perature. This may require you to lower the disinfection temperature and lengthen
the holding time (A
0
value).
Technical Data
74

Table of Contents

Related product manuals