Miele PWM 507 - Delay Start

Delay start
34
The Delay start function can be used to
set the time until the programme starts
or the programme finish time (see
“Delay start” under “Supervisor level”).
Selecting Delay start
 Touch the Further choicessensor.
 Select the Finish at, Start at or
Start inoption.
 Use the andsensors to enter the
hours and minutes and confirm your
entry with the OKsensor.
The minutes entry moves to the next
“full quarter of an hour” and can then
be adjusted in 15-minute increments.
Starting Delay start
 Touch the Start/Stopsensor.
The door will lock and the time until the
programme starts will appear in the dis-
play.
Cancelling or changing Delay
start
 Touch the Start/Stopsensor.
The following will appear in the display:
Add laundry
Cancel
programme
Start programme
immediately
 Touch the Start programme immedi-
atelysensor.
The wash programmes starts immedi-
ately.
or
 Touch the Cancel programmesensor.
The programme start is cancelled and
the Start/Stopbutton flashes on and
off.