Miele PWM 507 - Drainage

Installation
74
Drainage
Drain valve
The machine is drained using a motor-
ised drain valve. A DN70 angle con-
nector can be used for draining the ma-
chine via an on-site floor drain (gully
with odour trap).
Drain pump
The suds are drained through a drain
pump with a 1m delivery head. For the
water to drain freely, the hose must be
free of kinks. The elbow piece (access-
ory) can be hooked onto the end of the
hose.
Drainage options
1. Connected securely to a plastic drain
pipe with a rubber nipple (there is no
need to use a siphon).
2. Connected securely to a washbasin
with a plastic nipple.
3. Connected securely to a floor drain
(gully).
If required, the hose can be extended to
a length of up to 5m. Accessories are
available from Miele or from your Miele
dealer.
For a drain height of more than 1m (up
to a max. of 1.6m), a replacement drain
pump is available from Miele or from
your Miele dealer.