Miele PWM 507 User Manual

Problem solving guide
60
Opening the door in the event
of a blocked drain outlet and/
or power cut
 Risk of electric shock.
Only ever perform cleaning and
maintenance work when the appli-
ance is disconnected from the
power.
Disconnect the washing machine
from the mains electricity supply.
 Open the access panel to the drain
system.
Blocked drain outlet
If the drain outlet is blocked, there may
be a large quantity of water (max. 30l)
left behind in the washing machine.
 Risk of scalding due to hot suds.
Escaping suds will be hot if laundry
has been washed at high temperat-
ures.
Carefully allow all suds to drain off.
Emptying the drum
....For machines with a drain pump
 Place a suitable container under the
access flap.
Remove the drain filter, though not
completely.
 Slowly unscrew the drain filter to let
the water out.
 Tighten the drain filter back up again
if you need to interrupt the flow of
water.

Miele PWM 507 Specifications

General

Drum capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (spin)	72 dB
Noise level (wash)	- dB
Delayed start timer	Yes
Number of washing programs	-
Current	16 A
AC input voltage	400 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	37 L
Energy consumption washing per cycle	- kWh
Door hinge	Right
Water fill	Cold, Hot
Drum volume	64 L
Control type	Rotary
Loading type	Front-load
Product color	White
Door opening angle	167 °
Appliance placement	Freestanding
Package weight	104000 g

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	100000 g
Door diameter	300 mm