Miele PWM 507 - Payment System Lock; Delete Paid Signal; FOC Programmes

Supervisor level
88
Payment system lock
To avoid tampering, a programme lock
can be set up in programme opera-
tion. If the lock is applied, the pro-
gramme is interrupted and payment
credit is lost as soon as the door is
opened.
The time for the lock can be adjusted to
prevent laundry being added.
– Off: factory default
– As soon as the programme starts
– 1minute after the start of the pro-
gramme
– 2minutes after the start of the pro-
gramme
– 3minutes after the start of the pro-
gramme
– 4minutes after the start of the pro-
gramme
– 5minutes after the start of the pro-
gramme
Delete paid signal
The “Paid” signal in coin box mode
can be applied until the end of the
programme or discarded if the pro-
gramme is not started after 5minutes.
Factory default: Off
FOC programmes
In coin mode, you can decide which
programmes can be used for free.
Factory default: Off