Technical Information
W1900 Series Clothes Washers
W1966 & W1986 Programming Chart
Program #
Program Selector
Switch Position
Program Function
Options
Default Setting
W1966 and/or
W1986 Displayed
LED’s
W1986 Digital
Display
Not Used Rinses 1
Not Used Rinse Hold 2
Not Used Drain 3
USA 1200/900/600/400 X Final Spin 4
P19 Cottons 120 Spin Speed
Not Used Anti-Crease/End 5
P20 Cottons 140 Buzzer
USA only (cannot be
changed)
X <none> 0
USA X Rinses 1
Not Used Rinse Hold 2
Not Used Drain 3
Not Used Final Spin 4
P21 Cottons 190 (To be updated)
Not Used Anti-Crease/End 5
Table 6-6: Programming Mode Functions for W1966 & W1986 (continued from
Table 6-5)
6.5 Description of Programmable Options
Several programmable options exist for some of the functions in the
Programming Mode.
Warning!
To avoid uncontrolled appliance operation any programmable option
marked “DO NOT CHANGE” (in the descriptions below) should never be
set to any optional values / settings. The data provided is for
informational purposes only.
The following is a description of each function, the appropriate knob
position and a brief explanation of each setting:
RINSE LEVEL (Delicates 105)
The amount of water used for the rinse cycles depends on the amount of
water used during the first fill. At the beginning of the program the water
valve is opened until the first water level is registered. As the laundry
absorbs water, the water level drops. To maintain the original water level
57
To Next Page
Loading...
