Technical Information
W1900 Series Clothes Washers
6.6 Special Features
6.6.1 Electronic Program Lock
The Program Lock prevents the washer from being opened or the
program from being changed while the current program is running.
Activating the Program Lock
Once the wash program has started, hold the START Button until the
Door Lock Indicator illuminates. The washer’s program can no longer be
changed. At the end of the currently running program the Program Lock is
automatically cleared.
To cancel the Program Lock
Hold the START Button until the Door Lock Indicator goes out.
6.6.2 Child Safety Lock
The Child Safety Lock (when activated) disables the Door Switch and
ignores the position of the Program Selector Knob. The door cannot be
opened, a program cannot be selected and the appliance cannot be
operated.
To activate the Safety Lock
1. Close the door.
2. Turn the Selector Switch to the 12 o’clock position.
3. Turn on the washer.
4. Press / hold the Heavy Soil Button during steps 5 to 7.
5. Slowly turn the Program Selector clockwise to the COTTONS/140
position.
6. Slowly turn the Program Selector counterclockwise to the 12 o’clock
(End) position.
7. Slowly turn the Program Selector counterclockwise to the
DELICATES/cold position. The Door Lock Indicator (lower right of control
panel) flashes.
8. Release the Heavy Soil Button.
9. Turn the Program Selector to the 12 o’clock position.
10. Turn the washer off.
To deactivate the Safety Lock
Perform steps 4 through 10 above, the Door Lock Indicator turns off.
61
To Next Page
Loading...
