Technical Information
W1900 Series Clothes Washers
WATER CONTROL (Cottons Cold)
The Electronic can be programmed for two different Water Intake
Systems. The USA version uses solenoids and should not be changed.
Changes to this value may result in a non controllable water flow
condition (i.e. flooding condition). DO NOT CHANGE.
PROGRAM SWITCH SETTING ALLOCATION (Cottons 105)
This function allows for different programming of the wash cycle times
and cycle positions of the Selector Knob. The default setting is for the
USA Hydromatic IV B1. DO NOT CHANGE.
SPIN SPEEDS (Cottons 120)
USA and Canadian version only allow a setting up to 1200 rpm. DO NOT
CHANGE.
BUZZER (Cottons 140)
Setting for Buzzer activation. Does not apply to US models. DO NOT
CHANGE.
60
To Next Page
Loading...
