Miele W1903 - Table 6-9: Fault Indicators (Continued from Table 6-8) (Continued on Table 6-10)

Technical Information
W1900 Series Clothes Washers
Indicator Information
“Water Drain Check”
LED flashes
Water Drainage Failure. The water level is
monitored by the Water Level Switch to ensure the
Drain System is operating.
Drainage is monitored as follows:
If the preset water level setting is still present after
75 seconds of drainage, the “Water Drain Check”
LED flashes, however the program continues.
If water level one (1) is still present after 5 minutes
of drainage, the program is cancelled.
Table 6-9: Fault Indicators (Continued from Table 6-8) (Continued on Table 6-
10)
65