OM-256476 Page 20
SECTION 9 – MAINTENANCE AND STORAGE
F
Do not use solvents or abrasive cleaning detergents to clean the helmet. Do not immerse
the lens assembly in water.
F
Keep helmet dry; do not expose helmet to rain or snow. Keep helmet away from fire and
other sources of heat.
F
The auto-darkening lens uses sensitive electronics. Do not drop helmet or handle it in a
rough manner.
The helmet requires little maintenance. However, for best performance clean helmet after each
use. Using a soft cloth dampened with a mild soap and water solution, wipe the cover lenses
clean. Allow to air dry. Occasionally, the filter lens and sensors should be cleaned by gently
wiping with a soft, dry cloth.
Store helmet in a clean, dry, cool place free of solvent-based vapors. To prevent battery from
losing power, store helmet in helmet bag or in a dark location. Remove battery(s) if helmet will
be stored longer than six months.
End Of Useful Life
The welding helmet has no expiration date, and with proper care and maintenance it can pro-
vide many years of eye and face protection. The helmet can continue to be used, provided that
the helmet shell/shroud is undamaged (no cracks, gaps, or holes) and the lens functions nor-
mally (switches from a light state to a dark state.)
helm main 2019-05
To Next Page
Loading...
Need help?
General
