Milli-Q EQ 7000 - Settings and Configuration; System Configuration Options; HMI Configuration; Alarm Configuration

11
Dierent settings are available to customize the water purication system operation.
Depending on the user prole (end-user operator / system manager) some of the settings will
have either read-only or read & write access
.
SETTINGS MENU
Settings End-user
System
Manager
System
conguration
Lab close
Recirculation Read only Read only
Safety stop Read only
Foot pedal Read only
Screen saver Read only
Tank/Loop setting Read only Read only
Water sensor Read only
Feed quality measure Read only
Alarm relay activation Read only
Alarm relay conguration
Custom Volume
HMI
conguration
Brightness
Buzzer Read only
Alarm
conguration
Product resistivity Read only
Product TOC Read only
Inlet strainer clean Read only
IPAK Polishing cartridges
Millipak
Millipak Gold
LC-Pak
VOC-Pak
EDS-Pak
LC-Pak 0,1µm
0,1µm Pak
Connectivity Local network Read only
Date, Time & Lan-
guage
Time zone Read only
Date Read only
Time Read only
Language Read only
Password Activate / Change password
Units Resistivity / Conductivity Read only
Temperature Read only
Tank volume Read only
Temperature compensation Read only
Pressure Read only