Milli-Q EQ 7000 - LEDs Overview and Description

Introduction
4
LEDs overview
On the Q-POD
®
unit, 3 LEDs indicate the dierent states of the system:
1 LED on the Q-POD arm 3 Water Quality LED
2 System Power LED 4 System Alarm / Alert LED
1
2
3
4
LEDs description
LED Meaning
2
The system is powered on
STEADY: The water quality ts the requirements (water
quality values are below alarm setpoints)
BREATHING: The system is in recirculation mode
A water quality alarm is raised
An alert or alarm is raised
An high importance alarm is raised: the system is stopped
for safety reason
Note:
- The 3 LEDs light up when powering the system on.
- The 3 LEDs are breathing in case of maintenance (see page 20)