Milli-Q EQ 7000 - Manager Access and Password

Settings
12
Available apps:
°C / °F
Note: Dispensing while in this menu is not available.
Manager access & password
Login as a Manager
1. Press on the menu button
from the Home page.
2. Press on Login.
3. Enter system manager password.
To display & see the password while typing, click on the “Show code” checkbox.
Once logged-in, the manager icon
is displayed in the top left corner.
If a manual logout is not performed, the system manager prole will be automatically logged
o after 1 hour.
Note: By default this parameter is activated. The default password is PASS
If the system manager password is forgotten, contact the technical support hotline.
Log o as a Manager
1. Press on the menu button
.
2. Press on “Logout”.
Modify system manager settings
This can only be done when logged-in as a
manager.
In the Password app:
1. Deactivate/re-activate the manager password
through the password activation slider button.
2. If required, change the password.
Important! Deactivating the system manager prole will allow any user user to have read &
write access on all settings.
System
Conguration
Date, Time &
Language
Password
Alarm
Conguration
Connectivity
Units
HMI
Conguration