MIMAKI fine Cut 3 - Page 7

5
○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
3 Activate CorelDRAW.
No need to set the paper size to A3 size.
4 Enter “ABC”.
5 Click [Setting] button.
Set the communication conditions to enable communication between FineCut and the
plotter. (see page 33)
Click Set .