- 5.11 -
14. Press the [ENTER] key.
Perform the nozzle cleaning.
After completing the nozzle cleaning, the head moves on the
platen.
15. Open the front cover.
16. Fill the cap with the cleaning fluid using a
pipette.
Repeat the performance several times to clean the ink
discharge way for the air aspiration is performed fitfully.
Perform the operation for the each cap.
17. Close the front cover.
18. Press the [ENTER] key.
Carriage returns to the stasion and the menu returns to the
LOCAL mode.
INITIALIZING
PLEASE WAIT
< LOCAL >
STATION
COMPLETED : ent
INITIALIZING
PLEASE WAIT
To Next Page
Loading...
