- ix -
Structure of this Operation Manual
This manual consists of the following seven chapters to describe the handling of the device.
Chapter 1 Before Use
This chapter describes the name and function of each section of the device
as well as ink and media.
Chapter 2 Operations
This chapter describes a series of operations and settings, ranging from
power-on to end of plotting.
Chapter 3 Daily Cleaning
This chapter describes the recovery procedure for ink clogging and the
cleaning procedure for each section.
Chapter 4 Setting Function
This chapter describes the setting function.
Chapter 5 Maintenance Functions
This chapter describes the maintenance functions and how to replace a
wiper and a worn cutter blade.
Chapter 6 When abnormal conditions are encountered
This chapter describes how to correct troubles after the occurrence of an
abnormal condition on the device.
Appendix
This appendix describes the specifications of the device, function menu
structure and output samples and introduces separately-available
consumables.
To Next Page
Loading...
