- 1.9 -
Capping station
•When cleaning the capping station, be sure to wear the supplied goggle and
gloves since you may get ink in your eyes.
The capping station consists of ink caps, wipers for cleaning the heads, etc.
Cap : It covers the nozzle so as to prevent the head nozzle from drying up.
Wiper : It is used to clean the head nozzle.
The wipers are consumable parts. If the wiper is deformed or the media is stained, replace
the wiper with a new one.
Pinch roller and Feed roller
• While the device is not being used, keep the pinch roller in the upper posi-
tion. If the pinch roller is left lowered for an extended period of time, it can
deform and fail to securely retain the media.
This device retains a media with the pinch roller and the feed roller.
During plotting operation, the feed roller feeds the media forward.
Wiper
Cap
Pinch roller
Feed roller
To Next Page
Loading...
