- 5.19 -
[HEAD WASH]
• The washing liquid is separately available from your local distributor.
STEPS:
1. Select the [HEAD WASH].
page 5.2.
2. Press the [ENTER] key.
3. Press the Jog keys to select the head for
washing.
Select the head number by the set, 12 or 34.
• Selecting the head which has nozzle clogging
only enables to prevent consuming extra ink.
4. Press the [ENTER] key.
5. Remove the ink cartridges.
Ink is discharged to the waste ink tank.
6. When the display shown on the right appears,
set the cleaning cartridge.
Cleaning fluid is suctioned up.
7. When the display shown on the right appears,
remove the cleaning cartridge.
Suck in air.
8. When the display shown at right appears, set
the cleaning cartridge.
Cleaning fluid is suctioned up.
WASH
SET CLEAN TOOL
WASH
REMOVE TOOL
WASH
SET CLEAN TOOL
WASH
REMOVE CARTRIDGE
MAINTENANCE
HEAD WASH < ent >
HEAD WASH
HEAD SEL
: 1 2 . 3 4
HEAD WASH
HEAD SEL
: – – . 3 4
HEAD WASH
HEAD SEL
: – – . 3 4
HEAD WASH
HEAD SEL
: 1 2 . 3 4
To Next Page
Loading...
