- 5.15 -
MAINTENANCE
INT.WIPING < ent >
INT.WIPING
TEMP.DIFF. = 25 ° C
INT.WIPING
TEMP.DIFF. < ent >
INT.WIPING
TEMP.DIFF. = 20 ° C
< LOCAL >
TWICE
7. Press the [ENTER] key.
8. Press the jog key [
] or [ ] to select the num-
ber of the scanning for the regular wiping.
• INT.WIPING function is effective in case the
outside temperature is lower than the print
heater temperature setting, and the temperature
difference exceeds the value of “TEMP.DIFF.”.
9. Press the [ENTER] key.
10. Press the [END] key.
11.Press the [END] key twice.
The menu returns to the LOCAL mode.
To Next Page
Loading...
