- 2.14 -
14. Hold midium with a media press lightly.
• When using a leaf media, set it so that it does
not run off to the right of the pinch roller at the
right end.
• When using a thick media, remove the media
press from the media before plotting.
15. Set an empty paper tube to the take-up device.
16. Close the front cover and press the [ENTER]
key.
The width of the media is detected.
17. Press the Jog key [ ] to feed the media up to
the paper tube position of the take-up device.
To Next Page
Loading...
