- 2.19 -
• When using a leaf media, set it so that it does
not run off to the right of the pinch roller at the
right end.
4. Push down the clamp lever.
5. Close the front cover.
6. Press the [ENTER] key.
After the initial operation, the device enter the LOCAL mode.
page 1.15
7. Press the [ ] key.
The carriage moves to detect the media.
Then, the device enters the LOCAL mode.
( COVER OPEN )
PRESS < ENT > KEY
MEDIA SELECT
ROLL < > LEAF
< LOCAL >
width : 1272 mm
To Next Page
Loading...
