3-46
When [Ink Level] is displayed
When quantity of the remaining 600 cc ink becomes low, a warning [Ink Level] appears.
Enter the weight of the cartridge with the Ink Level Set function.
Using Ink Level Set function
1
If [Ink level] is displayed, remove the
600cc cartridge and measure the
weight of the 600cc cartridge.
• Be sure to measure the weight of the eco case
including the 600 cc ink pack.
2
Reset the 600 cc cartridge.
3
Press the key.
4
Pressing the keys
input the weight of the 600cc car-
tridge.
• Press the keys to move to another
digit.
• Press the keys to input the weight.
• This machine recalculates usable amount of remaining ink by entering the weight of the 600
cc cartridge.
• Ink Level Set function starts by resetting the 600 cc cartridge indicating [Ink Level] warning in
the local mode or remote mode (during waiting or printing).
• Weight the cartridge exactly down to the gram. Entering a larger weight than the actual one
may cause Nozzle Drop Out.
• Use the “E” display as a guide for replacing
the ink pack.
• If ink remains much in the ink pack even
when “E” is displayed, proceed to the Step 2
and the subsequent steps.
• Ink in the ink pack cannot be completely used
up. To prevent ink supply errors, about 30 cc
of ink must remain in the ink pack.
To Next Page
Loading...
