2. Daily Maintenance
10
2
Select [Station] > [Carriage Out] > [Move To Maint. Space], then press the [ENTER] key.
• The carriage moves to the maintenance space.
3
Open the maintenance covers.
4
Clean the underside of the UV-LED lamp.
• Wipe off any ink adhering to the UV-LED lamp underside using a cleaning stick moistened with
washing liquid.
• Wipe off the washing liquid. Make sure none remains.
5
Clean around the print head on the underside of the carriage.
• Wipe off any ink adhering to the carriage underside using a cleaning stick moistened with washing
liquid.
• Wipe off the washing liquid. Make sure none remains.
To Next Page
Loading...
Need help?
General