The end user must use the filtration listed in Exhibit A to comply
with CE. The OEM may choose to provide alternative filtering
that encompasses the Minarik drive and other electronics within
the same panel.
The OEM has this liberty because CE is a machinery directive.
Whether or not every component in the OEM’s machinery meets
CE, the OEM must still submit his machine for CE approval.
Thus, no component must necessarily meet CE within the
machine, as long as the OEM takes the necessary steps to
guarantee the machine does meet CE. By the same token, even if
every component in the OEM’s machine does meet CE, the
machine will not necessarily meet CE as a machine.
Using CE-approved wiring practices (like proper shielding) and
the filters listed in Exhibit A guarantee the drive will meet
EN55011 (1991 emissions standard) and EN50082-1 (1992
immunity standard).
43Certificate of Compliance
To Next Page
Loading...
