MINATO 1866 - General; Specifications

1
GENERAL
The Model 1866 EPROM Programmer is a PROM programmer
which incorporates 8 bit micro-processors and current
state-of-the-art LSls at its control section and avails itself
of their functions fully.
The object to be programmed includes EPROMs/ EEPROMs
from
16 k to 256 k -bits.
The 1866 Programmer is provided with an interface RS232C
2 SPECIFICATIONS
o CPU Z-80A (4.0MHZ)
o Buffer RAM 32 k- bytes (256 k- bits)
o Monitor RAM 2 k-bytes
o Monitor ROM 8 k-bytes
o Operation switch Hexadecimal key switch
o Display LED
o Interface Ser i al : RS-232C, 20mA
o Baud rate
o Tape format
o Tape parity
o Check function
o Temperature
o Power supply
o Power consumption
o Size
o Weight
Cu rrent loop, switch selectable
110 , 300,600,1200,2400,4800,
9600 switch sel ectable
11 kinds of formats, selectable
from keyboard
Odd, even, no parity switch
selectable
Memory test, Power test, Reverse
inertion test, programmer self test,
Others
+5 to +35 °C
AC 90V to 130V or 1 80V to 270V
(±10% ),50 / 60Hz
30VA
280(W) x 208(D) x 70(H) (mm)
1.5kg
for outside service . If it is conn e ct ed to a computer, pro-
grammed data may be transferr ed with ease from memories,
disks, etc. of the comput er ther e into.
It is provided with a 32 k-byte programming buff er memory,
permitting data up to 256 k-bits to be processed.
The 1866, owing to its small size and light weight, may be
transported with ease, and may be used in wide applications.
3