5 Exam Preparation
Operator’s Manual 5 - 5
5.3.2 End an Exam
Before examining a new patient, tap [End] to end the exam of the previous patient, update the
patient ID and information, to avoid mixing data of the next new patient.
To end an exam, do one of the following:
• Tap [End] on the touch screen to finish the current exam.
• Click [New Patient] on the Patient Info screen to end the last patient exam and clear the patient
information.
• Click [New Exam] on the Patient Info screen (or iStation screen, or Review screen) to end the
last exam and clear the exam data.
To Next Page
Loading...
Need help?
General
