EasyManuals Logo

Mindray Anesus Zeus User Manual

Mindray Anesus Zeus
338 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
3 System Preparation
Operator’s Manual 3 - 9
1. Place the printer appropriately.
2. Connect the power cord of the printer to a receptacle. Connect the USB port of the system to
the USB port of the printer with USB cable.
3. Load a paper roll and turn on the system and printer.
4. Add a print service:
a. Open [Setup] > [Print] screen.
b. Click [Add Service] to enter the page.
c. Select the service type and enter the service name manually.
d. Click [OK] to return to the page.
e. Select the target printer from the drop-down list in the “Property” box and set other
printing properties.
f. Click [OK] to complete.
3.8.3 Connecting a Wireless Printer
The system supports the wireless graph/text printer for the report print.
Perform the following procedure:
1. Plug the printer power cord to an appropriate outlet.
2. Power on the system and the printer.
3. Make sure the ultrasound machine and the printer are connected to a same LAN, and turned on
the W-LAN function of the printer.
4. Select [Setup] > [Print] to choose the report to be printed. Select the printer from the wireless
printer list, and set the printer.
5. Click [Save] to exit the preset and make the settings effective.

Table of Contents

Other manuals for Mindray Anesus Zeus

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mindray Anesus Zeus and is the answer not in the manual?

Mindray Anesus Zeus Specifications

General IconGeneral
BrandMindray
ModelAnesus Zeus
CategoryDiagnostic Equipment
LanguageEnglish

Related product manuals