4 Setup
Operator’s Manual 4 - 39
Turn on Wi-Fi function
1. Select [Network Settings] page in Network Preset screen.
2. Confirm the Wi-Fi is enabled: [Disable Wifi] appears on the screen.
Turn on hosted network function
Reserved.
Item Description
Status • No driver: click [SetupDriver] to enter the “TAP-Windows 9.21.2
Setup” interface, and do as instructed.
• Ready: the VPN is ready for use.
• Advance: VPN Advance Configuration
• Connected: VPN is successfully connected.
• Disconnected: VPN is disconnected.
• Error: error connection.
Server IP /
Group /
User Name /
Password /
Hide characters The password is displayed as *.
Connect/ Disconnect Connect or disconnect VPN.
Advance Enters the “VPN Advance Config” interface.
• Reset: if the system does not respond after you click [Config], click
[Reset].
• Config: enters the “OpenConnect-GUI VPN client” interface. For
details about the settings, please refer to the TAP manual.
NOTE:
After exiting the “VPN Advance Config” interface, you need to
reboot the system; otherwise, you cannot connect VPN normally.
Close Close the “VPN Advance Config” interface.
To Next Page
Loading...
Need help?
General
