Mindray CAL 8000 - Page 83

Operating the Control and Management Module (CMU)
6-7
1.
Click “Export”, and the dialog below will pop up.
2.
Specify the “Date Range”, and the enter or browse to the directory you want to save
the exported file.
3.
Click “OK” to close the dialog box and start exporting.
 Editing the sample ID
1.
Double click on the desired item, and the dialog box below pops up.
2.
Enter the new sample ID, and tap “OK”.
6.3.2 Order Setup
Set up analysis mode for the samples within the barcode range of a specified tube rack.