Operating the Control and Management Module (CMU)
6-10
Barcode unidentified samples
You can check the “Sample ID”, sample “Position”, time and instrument of the analysis, as
well as the test
panel.
6.3.4 Checking the Logs
The log records the key operations performed on the system. It provides the operators an
access to review the operation history and service personnel the facilitation of
troubleshooting.
The system can save 200,000 logs at most. If number of logs exceeds the upper limit, the
oldest log will be overwritten by the latest one. Operators can only view the logs, but cannot
To Next Page
Loading...
